10 Stages of a Field Recording

0
119
Field Recording

Now that you have got your equipment and planned everything for your first field recording, it is time to take your first field trip.

10 Stages of a Field Recording

Check out your equipment before taking your trip!

1Pack your equipment

Check your equipment last time and pack them carefully. After that, you are free to go.

Sometimes a bike is the best transport option!

2Transport

Depart your location and head to your recording destination with a transport method you chose in the planning stage.

Scouting helps you to find the best recording spot!

3Scouting

When you arrive at your destination, you may scout the area first to determine whether it is the best place to do your recording or not. Sometimes even with careful planning, you may have to wander for a while to find the best area. You may also find another sound sources there for your future recordings while scouting.

Set up your gear when you find the right spot!

4Setup

After finding the best area to record, you set up and power up your equipment. You’ll also want to make sure that they are all functional. If the wind is blowing, you should make your windscreens ready.

Finding right angle and right range requires patience!

5Finding right angle and right range

Now that your equipment is ready, you can experiment with your recorder and microphones to find where your target sounds best. It may take a while to find the right angle and right range depending on where you are but it’s worth it. In this stage, you can just listen up without recording anything.

You may experiment to find the most convenient recording level!

6Setting levels

Also, you may wanna experiment with your recording levels. If you record too low, your recording may sound noisy when you boost its volume. If you record too loud (too hot), you run the risk of clipping which will ruin your entire field recording. Usually, it is common to adjust your gain on your recorder so that the level meter stays near -12 dB when the loudest sound is input. If the sound distorts even when you lower the input level of your recorder, try changing your microphone positions. So you may have to check your angle and range again.

Some portable recorders have low cut filters on them!

7Reducing noise

You can use the low-cut (or high-pass) filter (if any on your device) to reduce the wind noise and vocal pops. So you can experiment with it a little bit.

Take your time and get as many takes as you can!

8Recording

When everything ready, now it is time to record. Get as many takes as you can of your sound source. Having too many recordings of the same source is better than taking a second trip and do everything from scratch. So take your time, calm down, be patient.

Taking notes in the field proves to be useful!

9Taking notes

You may take notes about when, where, how, with which equipment, from which angle and range you made the recording. Having those specific notes about each take will be useful later in the post. They will also serve as your experiment details. You will learn more about field recording from them.

Make sure you are having fun while recording!

10Having fun

Just like in the planning stage, having fun in the field is so important and awarding. The sonic world is so much fun and exciting. It is like capturing something in a time capsule.

LEAVE A REPLY

Please enter your comment!
Please enter your name here